LTPRHP3W Serisi – Opto Engineering Lighting
Request a quote for current pricing and stock on our B2B products — we respond the same day.
3W LED pattern projectors
Technical Specifications
The LTPRHP3W series features advanced and efficient LED projectors for structured light applications such as, quality control, 3D reconstruction, 3D profilometry, stereovision, planarity control, robot guidance for pick and place and alignment applications. Unlike laser sources, which typically show poor line sharpness and power distribution as well as scattering, speckle and diffraction effects, LTPRHP3W pattern projectors integrate LED sources and precisely engraved patterns ensuring thinner lines, sharper edges and more homogeneous illumination. The LTPRHP3W series is available in different colors and features a wide selection of projection patterns (see PTPR series ) which can be easily interchanged to project any kind of shape. Additionally, LTPRHP3W features built-in phase- adjustment for easy alignment of the pattern. Any C-mount optics can be interfaced to project areas with different sizes. LTPRHP3W LED projectors integrate built-in electronics that control the current flow through the LED and can be easily tuned by the user.
Örnek model teknik özellikleri — LTPRHP3W-R
| Lighting specifications | ||
| Active area diameter | (mm) | 11 |
| Light color, peak wavelength | red, 625 nm | |
| Spectral FWHM | (nm) | 20 |
| Illuminance (1) | (klux) | 9 |
| Electrical specifications | ||
| Operating mode (2) | Continuous and strobe | |
| Supply voltage (3) | (V) | 12-24 |
| Power consumption | (W) | 4.5 |
| LED forward voltage typical (max) (4) | (V) | 2.4 (3) |
| Max LED forward current (5) | (mA) | 720 |
| Max pulse current (6) | (mA) | 2000 |
| Estimated MTBF (7) | (hours) | > 100000 |
| Connector | M8 | |
| Cables | CB244P1500 included | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | Yes | |
| Diameter (6) | (mm) | 38.5 |
| Length | (mm) | 90.8 |
| Mass | (g) | 153 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 25 Jul 2024
Notes
- With a 35 mm lens, F/N 1.4 at 100 mm working distance without projection pattern at maximum driving current. Estimated value.
- To pulse LTRPHP3W, models built-in electronics must be bypassed in order to drive the LED directly.
- Tolerance ± 10%
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements
- Max continuous LED driving current is supplied through the built-in electronics. No external controller is required.
- At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
- At 55 °C, 720mA.
Bu seride 5 model bulunmaktadır. Mevcut modeller: LTPRHP3W-R, LTPRHP3W-G, LTPRHP3W-B, LTPRHP3W-W, LTPRHP3W-IR850
Uygulamanıza uygun boyut, renk ve dalga boyu için teklif isteyin.
You may also be interested in
LTVT Serisi – Opto Engineering Lighting
Request price quote
LTVPZ Serisi – Opto Engineering Lighting
Request price quote
LTVPE Serisi – Opto Engineering Lighting
Request price quote
LTTNC Serisi – Opto Engineering Lighting
Request price quoteRequest a Quote
Product: LTPRHP3W Serisi – Opto Engineering Lighting