+90 (216) 989 12 53 info@gokservision.com Pazartesi – Cuma · 10:00 – 18:00 TR | EN

SVL – ODLX150 OverDrive Direct Connect Bar/Linear Light

Fiyat için teklif alın

B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.

The modular design of the ODLX150 linear light, part of the Direct Connect Linear Light Series, offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. The light operates in OverDrive ™ strobe-only mode. This innovative design requires a power connection to the first light but eliminates the need for jumper cables to pass power through to the next, enabling tailored-length solutions in increments of 150 mm. Direct connect up to sixteen ODLX150 together.

Tüm teknik özellikleri gör

Hemen Arayın
Kategori: Bar Aydınlatmalar, Endüstriyel Aydınlatma, Smart Vision Lights Etiketler: Endüstriyel Aydınlatma, Lineer Bar Light, SVL Destek: Kurulum, entegrasyon ve yazılım desteği Gökser Vision güvencesiyle.
Detaylar

Teknik Özellikler

  • Electrical Input: 24 V DC +/- 5%
  • Input Current: Max. 700 mA
  • Wattage: Max. 17 W
  • On / Off Input: PNP > +4VDC or greater to activate | NPN > GND (<1VDC) to activate
  • PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
  • NPN Line: 15 mA @ Ground (0VDC) Yellow Indicator LED LED Strobe Indicator ON = Light Active Green Indicator LED ON = Power
  • Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
  • Potentiometer: 270º turn pot – Intensity control of 10% to 100%. Turn clockwise to increases intensity.
  • Analog Intensity: The output is adjustable from 10%–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: -18º–40º C (0º–104º F)
  • IP Rating: IP50
  • Weight: ~285g
  • Compliances: CE, RoHS, IEC 62471
Benzer Ürünler

Bunlar da ilginizi çekebilir