Opto Engineering Kameralar Endüstriyel Kameralar

ITA16-GC-10C-EL – Opto Engineering ITALA Kamera

Name: ITA16-GC-10C-EL – Opto Engineering ITALA Kamera
Brand: Kamera

Fiyat için teklif alın

B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.

Area scan camera 1456 x 1088 MP, Sony IMX273, CMOS Global shutter, 1/2.9", Color, 1 GigE, POE, C mount, with integrated liquid lens controller

Tüm teknik özellikleri gör

Hemen Arayın

Kategori: Opto Engineering Kameralar, Endüstriyel Kameralar Etiketler: Kamera, OptoEngineering, ITALA, Endüstriyel Kamera Destek: Kurulum, entegrasyon ve yazılım desteği Gökser Vision güvencesiyle.

Detaylar

Teknik Özellikler

Sensor specifications
Megapixel		1.6
Resolution		1456 x 1088
Sensor format		1/2.9"
Sensor diagonal	(mm)	6.2
Pixel size	(μm)	3.45
Sensor model		IMX273
Sensor type		CMOS
Shutter		Global
Chroma		Color

Camera specifications
Filter		IR cut
Frame rate (1)	(fps)	74.2
Burst frame rate	(fps)	126.6
Exposure time		1 μs - 10 s
ADC resolution	(bit)	10/12
Dynamic range	(dB)	70.5
Gain range	(dB)	0-48
SNR	(dB)	40.0
Image buffer	(MB)	384
Image processing		Binning, decimation, ROI, gamma, black level, LUT, defective pixel correction, white balance, color corection matrix
Pixel formats		Mono 8, RGB8, Bayer GR 8/10p/10Packed/12p/12Packed, YUV 422_8, YUV411_8_UYYVYY
Chunk data		yes
User sets		3
Timers/Counters		2/4
Synchronization		Free run, software trigger, hardware trigger, PTP (IEEE 1588)

Connectivity and electrical specifications
Data connector		RJ45
Data interface		1 GigE
I/O connector		12-pin Hirose
I/O interface		2x opto-isolated input, 1x opto-isolated output
Serial interface		no
Liquid lens controller		yes, Optotune and Corning
Encoder interface		yes, incremental
Power supply	(V)	12-24, PoE (IEEE 802.3af class 2)
Max power consumption (2)	(W)	5.3

Compliance and reliability
Standards		GigE Vision 2.2, GenICam, GenTL
Client software		ITALA View or other GigE Vision 2.x software
Operating systems		64-bit Windows 10/11, Ubuntu 18.04 or higher
Shock and vibrations		EN 60068-2-27, EN 60068-2-6, EN 60068-2-64
Warranty	(years)	5

Mechanical specifications
Mount		C
Dimensions	(mm)	40.5 x 40.5 x 51.2
Clamping system		16x M3 threaded holes (on all sides)
Mass	(g)	142

Environmental specifications
Operating temperature (3)	(°C )	-25 - +65
Storage temperature (4)	(°C )	-10 - +60
Operating relative humidity	(%)	20-80, non condensing
IP rating		IP30