LTCLHP Serisi – Opto Engineering Aydınlatma
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
High-performance telecentric illuminators
Teknik Özellikler
LTCLHP series are high-performance telecentric illuminators specifically designed to back illuminate objects imaged by telecentric lenses. This high performance series provides: Excellent illumination stability featuring no light flickering thanks to very high current stability over time even at low currents. Precise light intensity tuning thanks to the leadscrew multi-turn trimmer positioned in the back. Easy LED source replacement and alignment for all the LED colors offered by Opto Engineering®. LTCLHP telecentric illuminators offer higher edge contrast when compared to diffused back light illuminators and therefore higher measurement accuracy. This type of illumination is especially recommended for high accuracy measurement of round or cylindrical parts where diffusive back lighting would offer poor performances because of the diffuse reflections coming from the edges of objects under inspection.
Örnek model teknik özellikleri — LTCLHP023-R
| Lighting specifications | ||
| Beam diameter | (mm) | 16 |
| Working distance range | (mm) | 45 - 90 |
| Light color, peak wavelength (1) | red, 625 nm | |
| Spectral FWHM | (nm) | 20 |
| Electrical specifications | ||
| Supply voltage (2) | (V) | 12-24 |
| Max power consumption | (W) | 2.5 |
| LED forward voltage typical (max) (3) | (V) | 2.4 (3) |
| Max LED forward current (4) | (mA) | 350 |
| Max pulse current (5) | (mA) | 2000 |
| Connector | M8 | |
| Cables | CB244P1500 included | |
| Mechanical specifications | ||
| Length (6) | (mm) | 96.8 |
| Front diameter | (mm) | 28.0 |
| Mass | (g) | 152 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 08 Oct 2025
Notes
- Opto Engineering® recommends green light for high precision measurement applications
- Tolerance ± 10%
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements
- In continuous mode (non-pulsed)
- At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
- Nominal value, with no spacers in place
Bu seride 47 model bulunmaktadır. Mevcut modeller: LTCLHP023-R, LTCLHP023-G, LTCLHP023-B, LTCLHP023-W, LTCLHP016-R, LTCLHP016-G, LTCLHP016-B, LTCLHP016-W, LTCLHP024-R, LTCLHP024-G, LTCLHP024-B, LTCLHP024-W…
Uygulamanıza uygun boyut, renk ve dalga boyu için teklif isteyin.
Bunlar da ilginizi çekebilir
LTVT Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTVPZ Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTVPE Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTTNC Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alınTeklif İste
Ürün: LTCLHP Serisi – Opto Engineering Aydınlatma