LTPRSMHP3W Serisi – Opto Engineering Aydınlatma
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
3W tilting LED pattern projectors
Teknik Özellikler
LTPRSMHP3W series are LED pattern projectors specifically designed for the most demanding 3D profiling and measurement applications. Triangulation techniques require that structured light is directed onto a sample at a considerable angle from vertical. Tilting the light source pattern becomes essential to ensure that the patterned light is properly focused across the entire sample surface. LTPRSMHP3W pattern projectors integrate a precision tilting mechanism based on the Scheimpflug condition. This ensures that focus is maintained across the entire part, and reconstruction of the 3d surface is as accurate as possible. Moreover, the internal focus mechanism offers the maximum optical throughput.
Örnek model teknik özellikleri — LTPRSMHP3W-R
| Lighting specifications | ||
| Active area | (mm x mm) | 8 x 8 |
| Max pattern tilt | (deg) | 45 |
| Light color, peak wavelength | red, 625 nm | |
| Spectral FWHM | (nm) | 20 |
| Illuminance (1) | (klux) | 9 |
| Electrical specifications | ||
| Operating mode (2) | Continuous and strobe | |
| Supply voltage (3) | (V) | 12-24 |
| Power consumption | (W) | 4.5 |
| LED forward voltage typical (max) (4) | (V) | 2.4 (3) |
| Max LED forward current (5) | (mA) | 720 |
| Max pulse current (6) | (mA) | 2000 |
| Estimated MTBF (7) | (hours) | > 100000 |
| Connector | M8 | |
| Cables | CB244P1500 included | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | Yes | |
| Diameter | (mm) | 70.0 |
| Length | (mm) | 104.1 |
| Mass | (g) | 349 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 25 Jul 2024
Notes
- With a 35 mm lens, F/N 1.4 at 100 mm working distance without projection pattern at maximum driving current. Estimated value.
- To pulse LTRPSMHP3W, models built-in electronics must be bypassed in order to drive the LED directly.
- Tolerance ± 10%
- Max continuous LED driving current is supplied through the built-in electronics. No external controller is required.
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements
- At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
- At 55 °C, 720mA.
Bu seride 4 model bulunmaktadır. Mevcut modeller: LTPRSMHP3W-R, LTPRSMHP3W-G, LTPRSMHP3W-B, LTPRSMHP3W-W
Uygulamanıza uygun boyut, renk ve dalga boyu için teklif isteyin.
Bunlar da ilginizi çekebilir
LTVT Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTVPZ Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTVPE Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alın
LTTNC Serisi – Opto Engineering Aydınlatma
Fiyat için teklif alınTeklif İste
Ürün: LTPRSMHP3W Serisi – Opto Engineering Aydınlatma