TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Telecentric lens for 37.4 mm sensor, mag 1.600x, WD 163.1 mm, F mount
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 1.600 |
| Image circle diameter | (mm) | 37.4 |
| Max sensor size | 2.4″ | |
| Object field of view | ||
| 4/3" IMX367 - 15.29 x 15.30 | (mm × mm) | 9.56 x 9.56 |
| APS-C IMX342 - 22.36 x 16.77 | (mm × mm) | 13.98 x 10.48 |
| CHR70M - 31.00 x 21.99 | (mm × mm) | 19.38 x 13.74 |
| CMV50000 - 36.43 x 27.62 | (mm × mm) | ø = 17.26 |
| Advanced optical specifications | ||
| Working distance (1) | (mm) | 163.1 |
| Wavelength range | (nm) | 760-825 |
| Working ƒ/N (2) | 10-32 | |
| Telecentricity typical (max) (3) | (deg) | <0.08 (0.10) |
| Distortion typical (max) (4) | (%) | <0.08 (0.10) |
| Depth of field (5) | (mm) | 0.20 |
| Resolution (6) | (μm) | 4 |
| Mechanical specifications | ||
| Mount (7) | F | |
| Phase adjustment (8) | Yes | |
| Length (9) | (mm) | 230.2 |
| Front diameter | (mm) | 61 |
| Mass | (g) | 959 |
Last update 15 Nov 2024
Notes
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- FD stands for Flange Distance (in mm), defined as the distance from the mounting flange to the camera detector plane.
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M036-I – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCSE16M024NIR-F – Opto Engineering Telecentric Lens