Defect Detection / Presence-Absence Check
Camera inspection of mass-produced parts at line speed: process errors, missing components and dimensional deviations in a single station.
Seri ÜretimHat Üstü KontrolFikstürsüz Ölçüm
100% inspection at line speed
Every produced part is inspected instead of sampling. The camera captures parts flowing on the conveyor; process errors such as missing holes, reversed assembly, burrs or missing components are detected within milliseconds by image processing.
7/24Uninterrupted inline operation
msMillisecond-level decision per part
0Fixtures required — neutral-position measurement
I/OPass/Fail signalling with PLC
Fixtureless, flexible setup
No fixturing is required: pattern matching finds part orientation automatically and measurement happens in a neutral position. Defect checking and measurement run in the same station; defective parts are diverted from the line via PLC signal.
Related Products
Products used in this application
Opto Engineering Cameras · Industrial Cameras
ITA246-GC-20C-EL-IP – Opto Engineering ITALA Kamera
Request price quoteOpto Engineering Cameras · Industrial Cameras
ITA246-GM-20C-EL-IP – Opto Engineering ITALA Kamera
Request price quoteOpto Engineering Cameras · Industrial Cameras
ITA204-GC-20C-EL-IP – Opto Engineering ITALA Kamera
Request price quoteOpto Engineering Cameras · Industrial Cameras
ITA162-GC-20C-EL-IP – Opto Engineering ITALA Kamera
Request price quoteShall we build this for your line?
Tell us about your part, your line and your tolerance — we will respond with a concrete proposal.
Request a Quote