TC4MHRP004-C – Opto Engineering Telecentric Lens
Request price quote
Request a quote for current pricing and stock on our B2B products — we respond the same day.
High resolution telecentric lens for 4/3″ sensors, magnification 4.000x, C mount
Details
Technical Specifications
| Main optical specifications | ||
| Magnification | (x) | 4.000 |
| Image circle diameter | (mm) | 22.0 |
| Max sensor size | 4/3″ | |
| Object field of view | ||
| 1" - 14.19 x 7.51 | (mm × mm) | 3.55 x 1.88 |
| 1.1″ - 14.16 x 10.37 | (mm × mm) | 3.54 x 2.59 |
| 4/3″ - 18.93 x 10.61(1) | (mm × mm) | 4.73 x 2.65 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 56.0 |
| Working ƒ/N (3) | 18 | |
| Telecentricity typical (max) (4) | (deg) | <0.08 (0.10) |
| Distortion typical (max) (5) | (%) | <0.08 (0.10) |
| Depth of field (6) | (mm) | 0.10 |
| Resolution (7) | (μm) | 3 |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (8) | Yes | |
| Length (9) | (mm) | 155.2 |
| Front diameter | (mm) | 28 |
| Mass | (g) | 264 |
Last update 26 Aug 2025
Notes
- With IMX387 (21.7 mm diagonal) sensors, the FOV may show some vignetting at the image corners.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
Similar Products
You may also be interested in
Special Telecentric Series · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Request price quote
Special Telecentric Series · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Request price quote
Special Telecentric Series · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Request price quote
Special Telecentric Series · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Request price quoteRequest a Quote
Product: TC4MHRP004-C – Opto Engineering Telecentric Lens