TC12056 – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Bi-telecentric lens for 1/2″ sensors, magnification 0.114 x, C-mount
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.114 |
| Image circle diameter | (mm) | 8.0 |
| Max sensor size | 1/2″ | |
| Object field of view | ||
| 1/3” - 4.80 x 3.60(1) | (mm × mm) | 42.11 x 31.58 |
| 1/2.5” - 5.70 x 4.28(1) | (mm × mm) | 50.00 x 37.54 |
| 1/2” - 6.40 x 4.80(1) | (mm × mm) | 56.14 x 42.11 |
| 1/1.8” - 7.13 x 5.33(1) | (mm × mm) | 62.54 x 46.75 |
| 2/3” - 8.50 x 7.09(1) | (mm × mm) | ø = 62.19 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 157.8 |
| Working ƒ/N (3) | 8 | |
| Telecentricity typical (max) (4) | (deg) | < 0.04 (0.08) |
| Distortion typical (max) (5) | (%) | < 0.04 (0.08) |
| Depth of field (6) | (mm) | 31.90 |
| Resolution (7) | (μm) | 45 |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (8) | No | |
| Length (9) | (mm) | 205.0 |
| Front diameter | (mm) | 80 |
| Mass | (g) | 876 |
Last update 26 Aug 2025
Notes
- Object field of view (mm x mm). For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- If not available, phase adjustment can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TC12056 – Opto Engineering Telecentric Lens