TC4MHRP080-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
High resolution telecentric lens for 4/3″ sensors, magnification 0.220x, F mount
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.220 |
| Image circle diameter | (mm) | 22.0 |
| Max sensor size | 4/3″ | |
| Object field of view | ||
| 1" - 14.19 x 7.51 | (mm × mm) | 64.50 x 34.14 |
| 1.1″ - 14.16 x 10.37 | (mm × mm) | 64.36 x 47.14 |
| 4/3″ - 18.93 x 10.61(1) | (mm × mm) | 86.05 x 48.23 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 226.8 |
| Working ƒ/N (3) | 8 | |
| Telecentricity typical (max) (4) | (deg) | <0.04 (0.10) |
| Distortion typical (max) (5) | (%) | <0.08 (0.10) |
| Depth of field (6) | (mm) | 8.60 |
| Resolution (7) | (μm) | 23 |
| Mechanical specifications | ||
| Mount | F | |
| Phase adjustment (8) | Yes | |
| Length (9) | (mm) | 305.5 |
| Front diameter | (mm) | 116 |
| Mass | (g) | 1609 |
Last update 26 Aug 2025
Notes
- With IMX387 (21.7 mm diagonal) sensors, the FOV may show some vignetting at the image corners.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TC4MHRP080-F – Opto Engineering Telecentric Lens