TCCAGE3MHR048HP-C – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
High power bi-telecentric multi-imirror system for 1.1" sensors
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.303 |
| Sensor size (1) | (mm x mm) | 14.2 x 10.4 |
| Min sensor size | 1.1" | |
| Field of view (diameter x height) | ||
| Maximum (2) | (mm × mm) | 8.0 x 32.0 |
| Advanced optical specifications | ||
| Working ƒ/N (3) | 16 | |
| Depth of field (4) | (mm) | 9.00 |
| Coaxial light | ||
| Light color, peak wavelength | white, 6500K | |
| Power supply mode | Strobe only, constant current driving | |
| Supply voltage (5) | (V) | - |
| Max continuous current | (mA) | - |
| Typical pulse voltage | (V) | 30 |
| Max pulse current | (A) | 6 |
| Peak power consumption | (W) | 180.0 |
| Max duty-cycle | (%) | 1 |
| Max pulse duration | (ms) | 1 |
| Estimated MTBF (6) | (hours) | 50000 |
| Cable length | (m) | 0.3 |
| Connector | M8 | |
| Cables | CBLT003 included | |
| Ring light | ||
| Light color, peak wavelength | white, 6500K | |
| Power supply mode | Strobe only, constant current driving | |
| Supply voltage (5) | (V) | - |
| Max continuous current | (mA) | - |
| Typical pulse voltage | (V) | 20 |
| Max pulse current | (A) | 2 |
| Peak power consumption | (W) | 40 |
| Max duty-cycle | (%) | 2 |
| Max pulse duration | (ms) | 1 |
| Estimated MTBF (6) | (hours) | 50000 |
| Cable length | (m) | 0.3 |
| Connector | M8 | |
| Cables | CBLT003 included | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (7) | Yes | |
| Length | (mm) | 200.8 |
| Width | (mm) | 111.0 |
| Height | (mm) | 270.7 |
| Mass | (g) | 2063 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Operating relative humidity | (%) | 20 - 85, non-condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 21 Mar 2025
Notes
- Recommended sensor. Different sensor sizes may generate incomplete images.
- Maximum sample diameter in each of the four views and maximum sample height with the recommended sensor.
- Working f-number (wf/N): the real f-number of a lens in operating conditions. Lenses with reduced aperture can be supplied on request.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Tolerance ± 2%.
- Drop to 50% intensity @ 25°C.
- Indicates the availability of an integrated camera phase adjustment feature.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCCAGE3MHR048HP-C – Opto Engineering Telecentric Lens