TCCP12260 – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Ultra compact bi-telecentric lens for matrix detectors up to 1/1.8″, magnification 0.027, C mount
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.027 |
| Image shape dimension (1) | (mm x mm) | 7.48 x 5.60 |
| Max sensor size | 1/1.8″ | |
| Object field of view | ||
| 1/3” - 4.80 x 3.60 | (mm × mm) | 177.78 x 133.33 |
| 1/2.5” - 5.70 x 4.28 | (mm × mm) | 211.11 x 158.52 |
| 1/2” - 6.40 x 4.80 | (mm × mm) | 237.04 x 177.78 |
| 1/1.8” - 7.13 x 5.33 | (mm × mm) | 264.07 x 197.41 |
| 2/3” - 8.50 x 7.09 | (mm × mm) | - |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 366.0 |
| Working ƒ/N (3) | 8 | |
| Telecentricity typical (max) (4) | (deg) | < 0.18 (0.22) |
| Distortion typical (max) (5) | (%) | < 0.9 |
| Residual distortion (6) | (%) | < 0.01 |
| Depth of field (7) | (mm) | 567.90 |
| Resolution (8) | (μm) | 188.0 |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (9) | Yes | |
| Dimension A (10) | (mm) | 480 |
| Dimension B | (mm) | 397 |
| Dimension C | (mm) | 435 |
| Mass | (g) | 12291 |
Last update 08 Sep 2025
Notes
- Given the squared shape of the front window, the lens forms a rectangular image.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 5% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image: maximum (guaranteed) values of the uncorrected image are listed.
- Residual distortion after calibration with TCLIB Suite software library, using a PTCP calibrations pattern and a fully GenICam compliant camera. For setup information see related table.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Indicates the availability of an integrated camera phase adjustment feature.
- Maximum dimension of the clamping flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCCP12260 – Opto Engineering Telecentric Lens