TCCP5MHR260-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Ultra compact bi-telecentric lens for matrix detectors up to 4/3″, magnification 0.072x
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.072 |
| Image shape dimension (1) | (mm x mm) | 19.82 x 14.88 |
| Max sensor size | 4/3″ | |
| Object field of view | ||
| 1/1.2″ - 11.35 x 7.13 | (mm × mm) | 157.64 x 99.03 |
| 1″ - 14.19 x 7.51 | (mm × mm) | 197.08 x 104.31 |
| 1.1″ - 14.16 x 10.37 | (mm × mm) | 196.67 x 144.03 |
| 1.3" - 14.40 x 14.40 | (mm × mm) | 200.00 x 200.00 |
| 4/3″ - 18.93 x 10.61 | (mm × mm) | 262.92 x 147.36 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 346.0 |
| Working ƒ/N (3) | 12 | |
| Telecentricity typical (max) (4) | (deg) | < 0.18 (0.22) |
| Distortion typical (max) (5) | (%) | < 0.9 |
| Residual distortion (6) | (%) | < 0.01 |
| Depth of field (7) | (mm) | 119.80 |
| Resolution (8) | (μm) | 106 |
| Mechanical specifications | ||
| Mount | F | |
| Phase adjustment (9) | Yes | |
| Dimension A (10) | (mm) | 480 |
| Dimension B | (mm) | 397 |
| Dimension C (11) | (mm) | 441 |
| Mass | (g) | 12635 |
Last update 08 Sep 2025
Notes
- Given the squared shape of the front window, the lens forms a rectangular image (Tech Info for related drawing).
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 5% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image: maximum (guaranteed) values of the uncorrected image are listed.
- Residual distortion after calibration with TCLIB Suite software library, using a PTCP calibrations pattern and a fully GenICam compliant camera. For setup information see related table.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Indicates the availability of an integrated camera phase adjustment feature.
- Maximum dimension of the clamping flange.
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCCP5MHR260-F – Opto Engineering Telecentric Lens