TCCR4MP064-C – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Telecentric CORE lens for 4/3″ sensors, magnification 0.274x, C mount, WD 181.9 mm
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.274 |
| Image shape dimension (1) | (mm, mm) | Ø=22.0, x=18.7 |
| Max sensor size | 4/3″ | |
| Object field of view | ||
| 1" - 14.19 x 7.51 | (mm × mm) | 51.79 x 27.41 |
| 1.1" - 14.16 x 10.37 | (mm × mm) | 51.68 x 37.85 |
| 4/3" - 18.93 x 10.61(2) | (mm × mm) | 69.09 x 38.72 |
| Advanced optical specifications | ||
| Working distance (3) | (mm) | 181.9 |
| Working ƒ/N (4) | 8 | |
| Telecentricity typical (max) (5) | (deg) | <0.04 (0.10) |
| Distortion typical (max) (6) | (%) | <0.08 (0.10) |
| Depth of field (7) | (mm) | 5.50 |
| Resolution (8) | (μm) | 19 |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (9) | Yes | |
| Dimension A (10) | (mm) | 101 |
| Dimension B (10) | (mm) | 123 |
| Dimension C (10) | (mm) | 190.8 |
| Mass | (g) | 2017 |
Last update 26 Aug 2025
Notes
- Indicates the dimensions and shape of image, where "Ø =" stands for diameter and "x=" indicates the nominal image height and length (Tech Info for related drawing).
- With IMX387 (21.7 mm diagonal) sensors, the FOV may show some vignetting at the image corners.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Indicates the availability of an integrated camera phase adjustment feature.
- Due to the special shape of TCCR120xx it might be necessary to check the mechanical compatibility with your camera
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCCR4MP064-C – Opto Engineering Telecentric Lens