TCEL23036 – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Telecentric lens for 2/3″ sensors with integrated liquid lens, mag. 0.243x
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.243 |
| Magnification ranges at -2 dpt to +3 dpt | (x) | 0.239 - 0.250 |
| Image circle diameter | (mm) | 11.0 |
| Max sensor size | 2/3″ | |
| Object field of view | ||
| 1/3” - 4.80 x 3.60(1) | (mm × mm) | 19.75 x 14.81 |
| 1/2.5” - 5.70 x 4.28(1) | (mm × mm) | 23.46 x 17.61 |
| 1/2” - 6.40 x 4.80(1) | (mm × mm) | 26.34 x 19.75 |
| 1/1.8” - 7.13 x 5.33(1) | (mm × mm) | 29.34 x 21.93 |
| 2/3” - 8.50 x 7.09(1) | (mm × mm) | 34.98 x 29.18 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 101.5 |
| Working distance range (3) | (mm) | 122.9 - 73.2 |
| Working distance repeatability (4) | (mm) | ±0.5 (small steps); ±1 (large steps) |
| Working ƒ/N (5) | 8 | |
| Telecentricity typical (max) (6) | (deg) | < 0.08 (0.1) |
| Telecentricity max (7) | (deg) | < 0.15 |
| Distortion typical (max) (8) | (%) | < 0.04 (0.1) |
| Distortion max (7) | (%) | < 0.15 |
| Depth of field (9) | (mm) | 7.00 |
| Resolution (10) | (μm) | 21 |
| Liquid lens specifications | ||
| Liquid lens model | Optotune EL-16-40 | |
| Temperature sensor | Yes | |
| Focal power mode | Yes | |
| Response time (11) | (ms) | 5 |
| Setting time (11) | (ms) | 25 |
| Current range | (mA) | -500 to +500 |
| Repeatability using focal power mode | (dpt) | ±0.05 (small steps); ±0.1 (large steps) |
| Lifecycles (10%-90% sinusoidal) | >1,000,000,000 | |
| Connector | HR10A-7R-6PB | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (12) | Yes | |
| Length (13) | (mm) | 166.4 |
| Front diameter | (mm) | 61.0 |
| Mass | (g) | 539 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
Last update 29 Sep 2025
Notes
- Field of views are calculated at 0 dpt power of the liquid lens.
- Working distance (nominal): distance between the front end of the mechanics and the object at 0 pdt power of the liquid lens.
- Minimum and maximum working distance are reported at nominal range of the liquid lens; maximum excursion may be larger.
- Considering repeatability on the optical power of the liquid lenses over small (±0.05 dpt) and big (±0.1 dpt) steps
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side, evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
- Maximum values calculated in the range -2 to +3 dpt of the liquid lens.
- Percent deviation of the real image compared to an ideal, undistorted image, , evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Typical at 30°C, 0 to ±250 mA step.
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCEL23036 – Opto Engineering Telecentric Lens