TCLWD030-180-3M – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Telecentric lens for 1.1″ sensors, working distance 179 mm, magnification 0.300x
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification | (x) | 0.300 |
| Image circle diameter | (mm) | 17.6 |
| Max sensor size | 1.1″ | |
| Object field of view | ||
| 1/2.5” - 5.70 x 4.28(1) | (mm × mm) | 19.00 x 14.27 |
| 1/1.8” - 7.13 x 5.33(1) | (mm × mm) | 23.77 x 17.77 |
| 2/3” - 8.50 x 7.09(1) | (mm × mm) | 28.33 x 23.63 |
| 1″ - 14.19 x 7.51(1) | (mm × mm) | 47.30 x 25.03 |
| 1.1″ - 14.16 x 10.37(1) | (mm × mm) | 47.20 x 34.57 |
| Advanced optical specifications | ||
| Working distance (2) | (mm) | 179 |
| Working ƒ/N (3) | 8 | |
| Telecentricity (4) | (deg) | < 0.25 |
| Distortion (5) | (%) | < 0.15 |
| Depth of field (6) | (mm) | 4.60 |
| Resolution (7) | (μm) | 17 |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | Yes | |
| Length (8) | (mm) | 205 |
| Front diameter | (mm) | 82 |
| Mass | (g) | 642 |
Last update 08 Nov 2024
Notes
- Object field of view (mm x mm). For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image.
- At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCLWD030-180-3M – Opto Engineering Telecentric Lens