+90 (216) 989 12 53 info@gokservision.com Pazartesi – Cuma · 10:00 – 18:00 TR | EN
TCSM024 – Opto Engineering Telecentric Lens
Özel Telecentric Seri Telecentric Lens Machine Vision Lensler

TCSM024 – Opto Engineering Telecentric Lens

Fiyat için teklif alın

B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.

Bi-telecentric lens with Scheimpflug adjustment

Tüm teknik özellikleri gör

Hemen Arayın
Kategori: Özel Telecentric Seri, Telecentric Lens, Machine Vision Lensler Etiketler: Lens, OptoEngineering, Telecentric Destek: Kurulum, entegrasyon ve yazılım desteği Gökser Vision güvencesiyle.
Detaylar

Teknik Özellikler

Main optical specifications
Object tilt (deg) 0
15
30
45
Mount tilt (deg) 0
5.4
11.4
19.3
Horizontal magnification (x) 0.350
0.350
0.350
0.350
Vertical magnification (x) 0.350
0.340
0.309
0.262
Max sensor size 2/3″
Field of view, long sensor side horizontal
1/3” - 4.80 x 3.60(mm × mm) 13.71 x 10.29
13.71 x 10.59
13.71 x 11.65
13.71 x 13.74
1/2.5” - 5.70 x 4.28(mm × mm) 16.29 x 12.23
16.29 x 12.59
16.29 x 13.85
16.29 x 16.34
1/2” - 6.40 x 4.80(mm × mm) 18.29 x 13.71
18.29 x 14.12
18.29 x 15.53
18.29 x 18.32
1/1.8” - 7.13 x 5.33(mm × mm) 20.37 x 15.23
20.37 x 15.68
20.37 x 17.25
20.37 x 20.34
2/3” - 8.50 x 7.09(mm × mm) 24.29 x 20.26
24.29 x 20.85
24.29 x 22.94
24.29 x 27.06
Field of view, long sensor side vertical
1/3” - 3.60 x 4.80(mm × mm) 10.29 x 13.71
10.29 x 14.12
10.29 x 15.53
10.29 x 18.32
1/2.5” - 4.28 x 5.70(mm × mm) 12.23 x 16.29
12.23 x 16.76
12.23 x 18.45
12.23 x 21.76
1/2” - 4.80 x 6.40(mm × mm) 13.71 x 18.29
13.71 x 18.82
13.71 x 20.71
13.71 x 24.43
1/1.8” - 5.33 x 7.13(mm × mm) 13.71 x 12.23
14.12 x 12.23
15.53 x 12.23
18.32 x 12.23
2/3” - 7.09 x 8.50(mm × mm) 20.26 x 24.29
20.26 x 25.00
20.26 x 27.51
20.26 x 32.44
Advanced optical specifications
Working distance (1)(mm) 67.2
Working ƒ/N (2) 8
Telecentricity typical (max) (3)(deg) < 0.08 (0.10)
Distortion typical (max) (4)(%) < 0.04 (0.10)
Mechanical specifications
Mount C
Max mount tilt (deg) 20
Phase adjustment Yes
Length (5)(mm) 137.5
Front diameter (mm) 44.0
Mass (g) 493

Last update 05 Sep 2023

REACH

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler

Bunlar da ilginizi çekebilir

TCSE10M009-J – Opto Engineering Telecentric Lens
Özel Telecentric Seri · Telecentric Lens

TCSE10M009-J – Opto Engineering Telecentric Lens

Fiyat için teklif alın
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Özel Telecentric Seri · Telecentric Lens

TCSE16M024NIR-F – Opto Engineering Telecentric Lens

Fiyat için teklif alın
TCSE16M024-F – Opto Engineering Telecentric Lens
Özel Telecentric Seri · Telecentric Lens

TCSE16M024-F – Opto Engineering Telecentric Lens

Fiyat için teklif alın
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Özel Telecentric Seri · Telecentric Lens

TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens

Fiyat için teklif alın