TCZEL23056 – Opto Engineering Telecentric Lens
Fiyat için teklif alın
B2B ürünlerimizde güncel fiyat ve stok bilgisi için teklif talep edin — aynı gün dönüş yapıyoruz.
Telecentric zoom lens for 2/3″ sensors with integrated liquid lens, manification range from 0.18x to 0.55x
Detaylar
Teknik Özellikler
| Main optical specifications | ||
| Magnification range | (x) | 0.180 0.550 |
| Magnification ratio | (x) | 3 |
| Image circle diameter | (mm) | 11.0 |
| Max sensor size | 2/3″ | |
| Object field of view | ||
| 1/3” - 4.80 x 3.60 | (mm × mm) | 26.67 x 20.00 8.73 x 6.55 |
| 1/2.5” - 5.70 x 4.28 | (mm × mm) | 31.67 x 23.78 10.36 x 7.78 |
| 1/2” - 6.40 x 4.80 | (mm × mm) | 35.56 x 26.67 11.64 x 8.73 |
| 1/1.8” - 7.13 x 5.33 | (mm × mm) | 39.61 x 29.61 12.96 x 9.69 |
| 2/3” - 8.50 x 7.09 | (mm × mm) | 47.22 x 39.39 15.45 x 12.89 |
| Advanced optical specifications | ||
| Working distance range (1) | (mm) | 115 - 155 |
| Working ƒ/N (2) | 9 16 | |
| Telecentricity max (3) | (deg) | < 0.3 < 0.3 |
| Distortion max (4) | (%) | < 0.3 < 0.3 |
| Depth of field (5) | (mm) | 14.40 2.70 |
| Resolution (6) | (μm) | 32 18 |
| Liquid lens specifications | ||
| Number of lenses | 2 | |
| Liquid lens model | Optotune EL-16-40-20D | |
| Temperature sensor | Yes | |
| Focal power mode | Yes | |
| Response time (7) | (ms) | 5 |
| Setting time (7) | (ms) | 25 |
| Current range | (mA) | -500 to +500 |
| Repeatability using focal power mode | (dpt) | ±0.05 (small steps); ±0.1 (large steps) |
| Lifecycles (10%-90% sinusoidal) | >1,000,000,000 | |
| Connector | HR10A-7R-6PB | |
| Liquid lens controller | ||
| lens controller | Not integrated | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (8) | Yes | |
| Length (9) | (mm) | 249.3 |
| Front diameter | (mm) | 80.0 |
| Mass | (g) | 967 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
Last update 26 May 2025
Notes
- Working distance: distance between the front end of the mechanics and the object, reported at nominal range of the liquid lenses; maximum excursion may be larger.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side.
- Percent deviation of the real image compared to an ideal, undistorted image.
- At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Typical at 30°C, 0 to ±250 mA step.
- For controller data, see Optotune website
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
Benzer Ürünler
Bunlar da ilginizi çekebilir
Özel Telecentric Seri · Telecentric Lens
TCSE10M009-J – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024NIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M024-F – Opto Engineering Telecentric Lens
Fiyat için teklif alın
Özel Telecentric Seri · Telecentric Lens
TCSE16M028VISNIR-F – Opto Engineering Telecentric Lens
Fiyat için teklif alınTeklif İste
Ürün: TCZEL23056 – Opto Engineering Telecentric Lens