The LM75 compact linear light features an integrated Multi-Drive™ constant-current driver that operates in continuous operation or in OverDrive™ strobe mode depending on the wiring method. The light can be mounted via a rear T-slot channel, also offers over-current protection and PNP and NPN strobe trigger inputs. The LM75 has a 80 mm long housing and features 8 high-current LEDs.
Beğenilerine Ekle
Beğenilerine Ekle
Açıklama
- Electrical Input: 24VDC +/- 5%
- Input Current: Max. 275 mA (Continuous Operation) / Max. 3.1 A (Overdrive Operation)
- Wattage: Max. 6.3 W (Continuous Operation) / Max. 70 W (Overdrive Operation)
- PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @24VDC
- NPN Line: 15 mA @ Common (0VDC)
- OverDrive Mode: Not applicable (Continuous Operation) / Connect pin 5 to GND (see Wiring Configuration for more information) (Overdrive Operation)
- Strobe Duration: Not applicable (Continuous Operation) / Min. 10 μs | Max. 50 ms (Overdrive Operation)
- Duty Cycle: Not applicable (Continuous Operation) / Max. 10% (Overdrive Operation)
- Strobe Input: Not applicable (Continuous Operation) / PNP > +4VDC or greater to activate NPN > GND (<1VDC) to activate (Overdrive Operation)
- Continuous Operation Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both) (Continuous Operation) / Not applicable (Overdrive Operation)
- On/Off Input: PNP > +4VDC or greater to activate NPN > GND (<1VDC) to activate (Continuous Operation) / Not applicable (Overdrive Operation)
- Connection: 5-pin M12 connector
- Ambient Temperature: -18º–40º C (0º–104º F)
- IP Rating: IP65
- Weight: 128g
- Compliances: CE, RoHS, IEC-62471
Uzmana Sorun !
