SVL – LWE150 Washdown Linear Light

The LWE150 features a stainless-steel enclosure specially designed for the food industry and washdown environments where water and harsh detergents are present. The LWE150 has an integrated Multi-Drive constant-current driver that operates continuous operation or in OverDrive strobe mode, depending on wiring configuration. NPN or PNP trigger signals can be used to control the pulse of the light.

Beğenilerine Ekle
Beğenilerine Ekle

Açıklama

  • Electrical Input: 24VDC +/- 5%
  • Input Current: Max. 412 mA (Continuous Operation) / Max. 2.80 A (Overdrive Operation)
  • Wattage: Max. 10 W (Continuous Operation) /Max. 68 W (Overdrive Operation)
  • PNP Line4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @24VDC
  • NPN Line: 15 mA @ Common (0 VDC)
  • OverDrive Mode: Not applicable (Continuous Operation) / Connect pin 5 to GND (see Wiring Configuration for more information) (Overdrive Operation)
  • Strobe Duration: Not applicable (Continuous Operation) / Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information) (Overdrive Operation)
  • Duty Cycle: Not applicable (Continuous Operation) / Max. 10% (Overdrive Operation)
  • Strobe Input: Not applicable (Continuous Operation) / PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate (Overdrive Operation)
  • Continuous Operation Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both) (Continuous Operation) / Not applicable (Overdrive Operation)
  • On/Off Input: PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate (Continuous Operation) / Not applicable (Overdrive Operation)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: 0º–40ºC (32º–104ºF)
  • IP Rating: IP68
  • Weight: 760 g
  • Compliances: CE, RoHS, IEC 62471
Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir