SVL – LX300 Direct Connect Bar/Linear Light

The modular design of the LX300 linear light, part of the Direct Connect Linear Light Series, offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. The light operates in continuous operation. This innovative design requires a power connection to the first light but eliminates the need for jumper cables to pass power through to the next, enabling tailored-length solutions in increments of 300 mm. Direct connect up to eight LX300 together.

Beğenilerine Ekle
Beğenilerine Ekle

Açıklama

  • Electrical Input: 24VDC +/- 5%
  • Input Current: Max. 700 mA
  • Wattage: Max. 17 W
  • On / Off Input: PNP > +4VDC or greater to activate | NPN > GND (<1VDC) to activate
  • PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
  • NPN Line: 15 mA @ Ground (0VDC) Yellow Indicator LED LED Strobe Indicator ON = Light ActiveGreen Indicator LED ON = Power
  • Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
  • Potentiometer: 270º turn pot – Intensity control of 10% to 100%. Turn clockwise to increases intensity
  • Analog Intensity: The output is adjustable from 10–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: -18º–40º C (0º–104º F)
  • IP Rating: IP50
  • Weight: ~540g
  • Compliances: CE, RoHS, IEC 62471
Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir