Bi-telecentric CORE lens for 1/2″ detectors, magnification 0.134x, C-mount
Beğenilerine Ekle
Beğenilerine Ekle
Açıklama
| Main optical specifications | ||
| Magnification | (x) | 0.134 |
| Image shape dimension (1) | (mm, mm) | Ø=8.0, x=7.1 |
| Max sensor size | 1/2″ | |
| Object field of view | ||
| 1/3” (2) | (mm × mm) | 35.82 x 26.87 |
| 1/2.5” (2) | (mm × mm) | 42.54 x 31.94 |
| 1/2” (2) | (mm × mm) | 47.76 x 35.82 |
| 1/1.8” (2) | (mm × mm) | 53.21 x 39.78 |
| 2/3” (2) | (mm × mm) | ø =52.91 |
| Advanced optical specifications | ||
| Working distance (3) | (mm) | 132.9 |
| Working ƒ/N (4) | 8 | |
| Telecentricity typical (max) (5) | (deg) | < 0.07 (0.10) |
| Distortion typical (max) (6) | (%) | < 0.06 (0.10) |
| Depth of field (7) | (mm) | 23.10 |
| Resolution (8) | 38 | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment (9) | Yes | |
| Dimension A (10) | (mm) | 77 |
| Dimension B (10) | (mm) | 106 |
| Dimension C (10) | (mm) | 111 |
| Mass | (g) | 1096 |
Last update 05 Sep 2023
- Indicates the dimensions and shape of image, where “Ø =” stands for diameter and “x=” indicates the nominal image height and width (Tech Info for related drawing).
- Object field of view (mm x mm). For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the sensor.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- Indicates the availability of an integrated camera phase adjustment feature.
- Due to the special shape of TCCR120xx it might be necessary to check the mechanical compatibility with your camera
Uzmana Sorun !
