Açıklama
| Main optical specifications |
| Magnification |
(x) |
0.500 |
| Image circle diameter |
(mm) |
11.0 |
| Max sensor size |
|
2/3″ |
| Object field of view |
| 1/3” |
(mm × mm) |
9.60 x 7.20 |
| 1/2.5” |
(mm × mm) |
11.40 x 8.56 |
| 1/2” |
(mm × mm) |
12.80 x 9.60 |
| 1/1.8” |
(mm × mm) |
14.26 x 10.66 |
| 2/3” |
(mm × mm) |
17.00 x 14.18 |
| Advanced optical specifications |
| Working distance (1) |
(mm) |
132.3 |
| Working ƒ/N (2) |
|
12 |
| Telecentricity typical (max) (3) |
(deg) |
< 0.04 (0.06) |
| Distortion typical (max) (4) |
(%) |
< 0.1 (0.2) |
| Depth of field (5) |
(mm) |
2.50 |
| Resolution (6) |
(μm) |
15 |
| Lighting specifications |
| Light color, peak wavelength |
|
green, 525 nm |
| Spectral FWHM |
(nm) |
40 |
| Electrical specifications |
| Supply voltage |
(V) |
12-24 |
| Max power consumption |
(W) |
2.5 |
| LED voltage (7) |
(V) |
3.3 (4.0) |
| LED current (8) |
(mA) |
350 |
| Max pulse current (9) |
(mA) |
2000 |
| Connector |
|
M8 |
| Cables |
|
CB244P1500 included |
| Mechanical specifications |
| Mount |
|
C |
| Phase adjustment |
|
Yes |
| Length (10) |
(mm) |
131.2 |
| Front diameter |
(mm) |
37.7 |
| Mass |
(g) |
450 |
| Environmental specifications |
| Operating temperature |
(°C) |
0-40 |
| Storage temperature |
(°C) |
0-50 |
| Operating relative humidity |
(%) |
20-85, non condensing |
| Installation |
|
Indoor use only |
| Eye safety |
| Risk group according to CEI EN 62471:2010 |
|
Exempt |
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
- Used in continuous (not pulsed) mode.
- At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
- Measured from the front end of the mechanics to the camera flange.
It’s easy to select the right lens for your application: our part numbers are coded as TCCXxxx-y, where xxx defines the magnification (050 = 0.50, 066 = 0.66, 075 = 0.75, … ) and y defines the source color (“-G” stands for “green light”, “W” stands for “white light”). For instance, a TCCX050-G features a 0.50 magnification with a green light source.
