SVL – LB300 Linear Backlight Connect-a-Light

The LB300 array utilizes 12 high-intensity LEDs, features an integrated constant current driver built into the light and operates in continuous operation. The LB300 features a factory-installed 2447 diffuser backlight lens and is a viable option for silhouetting objects. NPN or PNP trigger signals can be used to control the on/off input of the light. The intensity of the light can be controlled via 1-10VDC analog signal line or manual potentiometer. Daisy-chain up to six LB300 lights together.

Beğenilerine Ekle
Beğenilerine Ekle

Açıklama

  • Electrical Input: 24VDC +/– 5%Input
  • Current: Max. 700 mA
  • Wattage: Max. 17 W
  • Strobe Input: PNP : +4VDC or greater to activate | NPN : GND (<1VDC) to activate
  • PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
  • NPN Line: 15 mA @ Ground (0VDC)
  • Yellow Indicator LED: LED Strobe Indicator ON = Light Active
  • Green Indicator LED: ON = Power
  • Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
  • Potentiometer: 270º turn pot — Intensity control of 10% –100%. Turn clockwise to increase intensity
  • Analog Intensity: The output is adjustable from 10%–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity.)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: -18º–40ºC (0º–104ºF)
  • IP Rating: IP50
  • Weight: ~370 g
  • Compliances: CE, RoHS, IEC 62471
  • Warranty: 10 years. For complete warranty information, visit smartvisionlights.com/warranty.
Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir