SVL – ODL300 OverDrive™ Linear Connect-a-Light

The ODL300 Bar/Linear Light utilizes 12 high-intensity LEDs and features an integrated OverDrive strobe driver with a maximum strobe rate of 5000 strobes per second. NPN or PNP trigger signals can be used to control the pulse of the light. The intensity of the light can be controlled via 1-10VDC analog signal line or manual potentiometer. Daisy-chain up to six ODL300 lights together.

Beğenilerine Ekle
Beğenilerine Ekle

Açıklama

  • Electrical Input: 24VDC +/–5%Input
  • Current: Max. 4.6 A draw during strobe | Max. average 460 mA
  • Wattage: Max. 110 W during strobe | Max. average 11 W
  • Strobe Input: PNP > +4VDC or greater to activate | NPN > GND (<1VDC) to activate
  • PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
  • NPN Line: 15 mA @ common (0VDC)
  • Duty Cycle: Max. 10%
  • Strobe/Pulse Time: Max. 5000 SPS (strobes per second) | Max. Single Pulse = 125 ms
  • Red Indicator LED: ON = Light Rest (LED inactive) | OFF = LED/Light Ready
  • Green Indicator LED: ON = Power
  • Potentiometer: 270º turn pot — intensity control of 10%–100%. Turn clockwise to increases intensity.
  • Analog Intensity: The output is adjustable from 10%–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity.)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: -18º–40ºC (0º–104ºF)IP
  • Rating IP: 50
  • Weight: ~370 g
  • Compliances: CE, RoHS, IEC 62471
  • Warranty: UV LEDs have a 2 year warranty, all other LEDs have a 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty
Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir