The LZE300, a SmartVisionLink™ enabled linear light, has similar features and functions as the LXE300, with the addition of communication with a SmartVisionLink™ managing device, such as the BTM-1000. When the LZE300 is connected to the BTM-1000, its intensity can be fully controlled, either for the entire light or for each of the three LED zones. Individual zones may also be turned off. The standard LZE300 has a 12 LED configuration.
The LZE300 is available in three different connector options:
- Direct Connect – This is the default option which allows connecting lights together with no additional cables. Lights are directly connected together, with no space between the lights. Up to six LZE300 lights can be directly connected together.
- Daisy-Chain – The Daisy-Chain option allows for a locking 5PM-12 Jumper Cable to be used when connecting LZE300 lights together. Lights are able to be spaced apart from each other. Up to six LZE300 lights can be Daisy-Chained together.
- Plug – If multiple units are not going to be used, a plug termination can be ordered.
The LZE300 also comes with NanoDrive technology, which enables a faster “on” and “off” compared to other technology.
Beğenilerine Ekle
Beğenilerine Ekle
Description
- Electrical Input: 24VDC +/- 5%
- PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @24VDC
- NPN Line: 15 mA @ Common (0VDC)OverDrive
- Strobe Mode: Not applicable(Continuous Operation) / Connect pin 5 to GND (see Wiring Configuration for more information) (OverDrive Operation)
- Strobe Duration: Not applicable (Continuous Operation) / Min. 10 μs | Max. 50 ms (OverDrive Operation)
- Duty Cycle: Not applicable (Continuous Operation) / Max. 10% (OverDrive Operation)
- Strobe Input: Not applicable (Continuous Operation) / PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate (OverDrive Operation)
- Continuous Operation Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both) (Continuous Operation) / Not applicable (OverDrive Operation)
- On/Off Input: PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate (Continuous Operation) / Not applicable (OverDrive Operation)
- Connection: 5-pin M12 connector
- Ambient Temperature: -18º–40º C (0º–104º F)
- IP Rating: IP65
- Weight: ~660 g
- Power Supply: A separate power supply for OverDrive mode (high-pulse operation)is recommended. (see Input Current for value)
- Compliances: CE, RoHS, IEC 62471
- Warranty: UV LEDs have a 2 year warranty, all other LEDs have a 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty
Uzmana Sorun !
