The modular design of the ODLX300 linear light, part of the Direct Connect Linear Light Series, offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. The light operates in OverDrive™ strobe-only mode. This innovative design requires a power connection to the first light but eliminates the need for jumper cables to pass power through to the next, enabling tailored-length solutions in increments of 300 mm. Direct connect up to eight ODLX300 together.
Beğenilerine Ekle
Beğenilerine Ekle
Description
- Electrical Input: 24VDC +/- 5%
- Input Current: Max. 700 mA
- Wattage: Max. 17 W
- On / Off Input: PNP > +4VDC or greater to activate | NPN > GND (<1VDC) to activate
- PNP Line: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDCNPN Line15 mA @ Ground (0VDC)Yellow Indicator LEDLED Strobe Indicator ON = Light Active Green Indicator LED ON = Power
- Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
- Potentiometer: 270º turn pot – Intensity control of 10% to 100%. Turn clockwise to increases intensity.
- Analog Intensity: The output is adjustable from 10%–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity)
- Connection: 5-pin M12 connector
- Ambient Temperature: -18º–40º C (0º–104º F)
- IP Rating: IP50
- Weight: ~540g
- Compliances: CE, RoHS, IEC 62471
Uzmana Sorun !
