The MOBL Backlight Series is designed for maximum output. The series works in continuous operation mode or can operate with either an NPN or PNP trigger signal when using on/off input mode. The MOBL Backlight runs on an industry-standard 24VDC. The 1-10VDC analog control line gives the user total control over intensity. Proper heat dissipation is achieved using the side extrusion and the heat sink installed on the bottom of the light. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The MOBL Backlight has a built-in driver. No external driver is required. This product comes in the following sizes: 150 mm x 150 mm, 300 mm x 150 mm, and 300 mm x 300 mm.
Description
- Electrical Input: 24VDC +/–5%
- On/Off Input: PNP: +4VDC or greater to activate | NPN: GND (<1VDC) to activate
- PNP Line: 4 mA @ 4VDC | 10 mA @ 12V DC | 20 mA @ 24VDCNPN Line15 mA @ ground (0VDC)
- Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
- Analog Intensity: The output is adjustable from 10%–100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity)
- Connection: 5-pin M12 connector
- Ambient Temperature: -18º–40º C (0º–104º F)
- IP Rating: IP50
- Compliances: CE, RoHS, IEC 62471
- Warranty: 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty.
Standard Light Sizes;
Input Current: 1.1 A (150mm x 150mm) / 2.2 A (300mm x 150mm) / 4.4 A (300mm x 300mm)
Wattage: 26.4 W (150mm x 150mm) / 52.8 W (300mm x 150mm) / 106 W (300mm x 300mm)
Weight: ~3.08 kg (150mm x 150mm) / ~4.80 kg (300mm x 150mm) / –
