SVL – ODLHF300 OverDrive™ Fluorescent Replacement

Part of the Direct Connect series linear lights, which offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. This light operates in OverDrive strobe mode. The ODLHF300 series was designed as a direct LED replacement for standard fluorescent lighting. The ODLHF300 array uses 30 high-intensity LEDs and features a diffuse lens cover designed to disperse the light in the same fashion as a fluorescent light of equivalent length. Use NPN or PNP trigger signal to control the light’s pulse.

Beğenilerine Ekle
Beğenilerine Ekle

Açıklama

  • Electrical Input: 24 V DC +/- 5%
  • Input Current: Max. 2A
  • Wattage: Max. 48 W
  • On / Off Input: PNP > +4 V DC or greater to activate | NPN > GND (<1 V DC) to activate
  • PNP Line: 4 mA @ 4 V DC | 10 mA @ 12 V DC | 20 mA @ 24 V DC
  • NPN Line: 15 mA @ Ground (0VDC) Yellow Indicator LED LED Strobe Indicator ON = Light Active Green Indicator LED ON = Power
  • Continuous Mode: NPN can be tied to ground OR PNP can be tied to 24 V DC (not both)
  • Potentiometer: 270º turn pot – Intensity control of 10% to 100%. Turn clockwise to increases intensity
  • Analog Intensity: The output is adjustable from 10–100% of brightness by a 1–10 V DC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity)
  • Connection: 5-pin M12 connector
  • Ambient Temperature: -18º–40º C (0º–104º F)
  • IP Rating: IP50
  • Weight: ~455g
  • Compliances: CE, RoHS, IEC 62471
Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir